Service
Manual
Before any intervention it is essential to cut off all supply of the machine
Repair
Temperature probe :
Checking
- Check the wiring.
- Check correspondence with the following table :
Manometric pressure
in KPa (Bar)
Temperature in °C
Replacing
- Remove the left cover.
- Remove the protection cover.
- Disconnect the probe cables from the A1 control display.
- Remove the probe and fit a new one.
- Refit the parts in the reverse sequence.
Rotating steam joint :
Checking
- Check sealing.
Replacing
- Stop the steam.
- Remove the left cover.
- Remove the steam injection protection cover.
- Remove the steam pipes.
- Remove the steam rotating joint from the heating cylinder.
- Fit the new joint.
- Refit the parts in the reverse sequence.
04106016/GB
43-09
Steam heating
(electricity, steam, water, gas, compressed air...).
Correspondence Pressure Steam / Temperature
300
400
(3)
(4)
143
151
500
600
700
(5)
(6)
(7)
158
164
169
7
800
900
1000
(8)
(9)
(10)
174
179
183
5