Electrolux IC44832 LF Service Manual page 191

Service
Manual
4. Click the menu «édition» and «Rechercher...».
5. Enter the name of the variable to find, and click «OK».
The variable sought is framed in red.
6. Click «Suivant» to access the next location of the variable to find
To change the value of the variable, double-click the variable and «Enter» to validate.
Once the value of the variable modified, save the program again, and transfer it to the PLC.
7. Click the menu «Fichier» and «Enregistrer».
8. Click the menu «Automate» and «Transfert PC => Automate».
9. Click «OK» to validate.
04106016/GB
43-09
pLC
Enter the name of the variable to find %MW...
16
13