Electrolux IC44832 LF Service Manual page 91

Service
Manual
Description
The system « Longitudinal folding » includes the following elements :
• 2 Photocells : B6 et B7
• 1 Rotation detection : B8
• 2 Position sensors : B9 & B10
• 2 Positions switch : S8 & S9
• 3 Contactors : KM3, KM4 & KM5
• 1 Folding arm clutch : Y5
• 1 Motor reducer (sheet evacuation) : M3
• 1 PLC : TWIDO A4
The B6 photocell (sheet present at feeding table) is fitted onto the feeding table. It is accessible
by the front of the machine.
The B7 photocell (sheet present at folder feed) is fitted at the outlet of the ironer, under the feed-
ing table. It is accessible by the front of the machine.
The B8 rotation detection (metering system) is fitted on the machine's movement motor reducer.
It is accessible by removing the machine's right cover.
The position sensors of the B9 (front) and B10 (back) folding arms are fitted on the machine's
frame on the folding arm's rotation axis. They are accessible by removing the machine's left
cover.
The S8 position switch (eject roller position) is set on the machine's frame at ejection roller
height. It is accessible by removing the machine's left cover.
The S9 end stop (reception vat position) is set on the machine's left side frame, under the re-
ceiver tray. It is accessible by the front of the machine.
The three KM3, KM4, and KM5 contactors are fitted onto the A2 ironer interconnection board.
They are accessible by removing the machine's left cover.
The Y5 clutch is fitted onto the machine's frame, on the level of the folding arm. It is accessible
by removing the machine's right cover.
The M3 motor reducer (sheet evacuation) is fitted onto the machine's frame. It is accessible by
removing the machine's left cover.
The PLC TWIDO is fitted in the machine's electrical cabinet. It is accessible by removing the
machine's left cover.
04106016/GB
43-09
Length folding
9
1