Setting Of The Feeding Clamp - Electrolux IC44832 LF Service Manual

11
Repair

Setting of the feeding clamp :

1. Unscrew the screw 'A',
2. Adjust the cam in order to have a
distance to 12mm between these and
the electromagnet,
3. Screw the screw 'A' back on,
4. Unscrew the 4 screw which fix the
electromagnet on the plier,
5. Push on the spring of the
electromagnet,
6. Put in contact the cam with the grip
using the electromagnet unit + cam,
7. Draw a line above the electromagnet,
8. Release the spring of the
electromagnet,
9. Fall the electromagnet + cam group
to 2mm compared with the line
drew before,
10. Tighten the electromagnet on the plier.
8
Feeding : Feeding clamps
electromagnet
line
line
Service
Manual
plier
A
cam
plier
electromagnet
+ cam
plier
electromagnet
+ cam
04106016/GB
43-09