17
Control display :
See operating handbook, Chapter 3 page 2
Menu / display :
See operating handbook, Chapter 3 page 7
Service program :
Switching to «Service Option» Mode»
The machine has been set in the factory to specific values of heating, folding, temperature,
ironing speed, operating language, etc. These values and specifications can be set in the
«Service Option» mode menus».
The parameters must always correspond to the specific type of machine.
CAUTION
The printed circuit control board carries very high voltages.
Maintenance should be carried
• Remove the left-hand side cover.
• Press on the printed circuit push-button «BP4» using an insulated tool.
• After completing the adjustments, put back the left-hand side cover.
BP4
2
Control display
Service
Manual
04106016/GB
43-09