Switch 3 Positions S201; Potentiometer P1; Push Button Indicator Bp202 - H201 - Electrolux IC44832 LF Service Manual

Service
Manual
Before any intervention it is essential to cut off all supply of the machine
Repair

Switch 3 positions S201 :

Checking
- Check the wiring.
- Using a multi-meter, check the push button's continuity when it is actuated.
Replacing
- Remove the protection cover from the clamp guiding rail.
- Disconnect the cables from the switch.
- Remove the switch and fit a new one.
- Refit the parts in the reverse sequence.

potentiometer p1 :

Checking
- Check the wiring.
- Using an ohmmeter, check that the value of the potentiometer varies when it is modified.
Otherwise, the potentiometer is faulty.
Replacing
- Remove the protection cover from the clamp guiding rail.
- Disconnect the cables from the potentiometer.
- Remove the potentiometer and fit a new one.
- Reconnect the cables and put the protection cover back.

push button indicator Bp202 - h201 :

Checking
- Check the wiring.
- Check the condition of the lamp's filament.
Replacing the H201 indicator
- Remove the protection cover from the clamp guiding rail.
- Disconnect the cables from the push button.
- Remove the push button.
- Replace the indicator or button according to the fault.
- Refit the parts in the reverse sequence.
04106016/GB
43-09
Feeding : Motion system
(electricity, steam, water, gas, compressed air...).
12
11