Equipment Required To Use The Twido; Twidosoft Software; Installation Of The Software - Electrolux IC44832 LF Service Manual

16

equipment required to use the TWIDO :

• 1 PC, preferably laptop, for easier use on customer site
• 1 TSXPCX 1031 cable on position 2 (item code: 96072012)
• 1 TWIDOSOFT package from Telemecanique

TWIDOSOFT SOFTWaRe

Installation of the software :

The following instructions explain how to perform the standard installation from the CD-ROM.
1. Close all applications before installing the software.
2. Insert the TWIDO SOFT disk in the CD-ROM drive.
3. The TWIDO SOFT software can be installed in several ways:
- Automatic opening of the Explorer window.
- Double-click the Setup.exe file in the disk's TWIDO SOFT folder.
- Click the Install button in Add/Remove programmes in the Control Panel.
- Select the Run option in the Start menu.
- Right-click the CD-ROM's icon in the Explorer and select Autorun in the menu.
4. Click «Install» and follow the instructions on screen.
5. Once the installation is complete, click Complete, and reboot the computer
(recommended).
6. To launch TWIDO SOFT, click the icon
2
pLC
on the desktop.
Service
Manual
04106016/GB
43-09