14
Midplane kit
14.1
Safety notes
CAUTION
▶
Do not damage or modify internal cables or devices. Doing so may
cause a device failure, fire, or electric shock.
▶
Devices and components inside the server remain hot after
shutdown. After shutting down the server, wait for hot components
to cool down before installing or removing internal options.
▶
Circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Always discharge static
build-up (e.g. by touching a grounded object) before handling
electrostatic-sensitive devices (ESDs).
▶
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
▶
If devices are installed or disassembled using methods other than
those outlined in this chapter, the warranty will be invalidated.
▶
The procedure of installation on this notes might change depending
on a configuration of options.
▶
For more information, see
14.2
Basic information
The midplane is the connection between the CPU node, the GPU node, the
switch board tray and the PSUs.
14.3
Replacing the midplane board
Field Replaceable Unit
(FRU)
GX2570 M6
"Important information" on page
Upgrade and Maintenance Manual
Hardware: 20 minutes
25.
225