Drive Modules - Danfoss VLT FC 102 Installation Manual

Product Overview

3.2 Drive Modules

Each drive module has an IP00 protection rating. Either 2 or 4 drive modules can be connected in parallel to create a drive
system, based on power requirements.
3 3
1
2
3
4
5
6
7
8
1 DC-link terminal and DC fuse
2 MDCIC plug
3 Microswitch to DC fuse
4 Relays 1 and 2
5 Brake fault jumper and connector
6 Mains input terminals (inside the unit)
7 Terminal cover
Illustration 3.1 Drive Module Overview
8
®
VLT Parallel Drive Modules
8 Ground terminals
9 Top fan
10 Drive module label. See Illustration 4.2.
11 Motor output terminals (inside the unit)
12 Heat sink and heat sink fan
13 Ground plate
– –
Danfoss A/S © 08/2017 All rights reserved.
9
10
11
12
13
MG37K302