Electrical Data; Case And Ambient Conditions - JUMO mTRON T Operating Manual

9 Appendix
9.1.3

Electrical data

Voltage supply
Connection
Voltage
Residual ripple
Current consumption
Power consumption
Inputs (terminals 1 to 18)
Connection
Conductor cross section on terminals 1 to 18
Wire or strand without ferrule
Strand with ferrule
Stripping length on terminals 1 to 18
Electrical safety
Electromagnetic compatibility
Interference emission
Interference immunity
9.1.4

Case and ambient conditions

Case type
Dimensions (W × H × D)
Weight
Protection rating
Ambient temperature range
Storage temperature range
Resistance to climatic conditions
Site altitude
Mechanical ambient conditions
1
Test conditions are listed in the System Descripton B 705000.8.
72
Lateral (feed via base unit or router module)
DC 24 V +25/-20 %
5 %
130 mA (at DC 19.2 V)
3 W
At the front (removable terminal strips with Push-In technology)
Min. 0.14 mm
Without plastic collar: Min. 0.25 mm
With plastic collar: Min. 0.25 mm
9 mm
Acc. to DIN EN 61010-1
Overvoltage category III, pollution degree 2
Acc. to DIN EN 61326-1
Class A – only for industrial use –
Industrial requirements
Plastic case for DIN rail mounting in the control cabinet (indoor use);
DIN rail acc. to DIN EN 60715, 35 mm x 7.5 mm x 1 mm
22.5 m × 103.6 m × 101.5 m (without connection elements)
Approx. 140 g
IP 20, acc. to DIN EN 60529
-20 to +55 °C
-40 to +70 °C
Relative humidity ≤ 90 % annual average without condensation (cli-
matic class 3K3 acc. to DIN EN 60721-3-3 with extended tempera-
ture and humidity range)
Up to 2000 m above sea level
1
Classification acc. to DIN EN 60721-3-3, table 6, class 3M2
2 2
, max. 1.5 mm
2
2
, max. 0.5 mm
2
, max. 1.5 mm
2