Online Parameters; Calibrate / Test; Analog Input - JUMO mTRON T Operating Manual

NOTE!
An active connection between the setup program and the central processing unit is required
to configure the parameters described in this section.
8.1

Calibrate / test

8.1.1

Analog input

CAUTION!
Incorrect settings may result in inadmissible changes to values.
This can have negative effects on the system function.
Individual functions must be changed only by (or under the instruction of) a service technician
of the device manufacturer.
Setup dialog
Parameter
Parameter
Measuring input
Sensor
Actual value
Test
?
Selection/settings
Select input (drop-down list).
Select sensor (drop-down list).
None
Click the "Test" button.

8 Online parameters

Description
Input on which the calibration or test is
to be performed.
Sensor type that is connected at the rel-
evant input.
Display of the actual value read out
An additional window opens with
instructions for testing (see below).
63