JUMO mTRON T Operating Manual page 40

Measuring, control, and automation system analog input module 4-channel

Hide thumbs Also See for mTRON T:

Table of Contents

6 Configuration

Resistance Ra or Ro, Rs or Rx, Re

The overall resistance Ra + Rs + Re (or Ro + Rx) must not exceed 4000 Ω.

Resistance transmitter

Resistance/potentiometer in 3-wire circuit

Status after change of configuration

The input values before the change of configuration are not saved; the new input values are

available approx. 2 seconds after the change of configuration.

Behavior after power on

All analog inputs are initialized and start their measurements over (no statuses are saved with

power off).

Resistance/potentiometer in 2-wire circuit

Resistance/potentiometer in 4-wire circuit

Table of Contents