Analog Inputs - JUMO mTRON T Operating Manual

6 Configuration
6.2

Analog inputs

The four analog inputs are universal measuring inputs for RTD temperature probes, thermo-
couples, resistance transmitters, resistance/potentiometers, and standard signals.
Setup dialog
Parameter
Parameter
Sensor
36
Selection/settings
Selection of measuring probe for the relevant analog input
No choice
RTD temp. probe 2-w
RTD temp. probe 3-w
RTD temp. probe 4-w
Resistance transmitter
Thermocouple
Current 0 to 20 mA
Current 4 to 20 mA
Voltage 0 to 1 V
Voltage 0 to 10 V
Voltage 2 to 10 V
Resistance/potentiometer 2-w
Resistance/potentiometer 3-w
Resistance/potentiometer 4-w
Description
No sensor selected
RTD temperature probe in 2-wire circuit
RTD temperature probe in 3-wire circuit
RTD temperature probe in 4-wire circuit
Resistance transmitter
Standard signal
Standard signal
Standard signal
Standard signal
Standard signal
Resistance/potentiometer in 2-wire cir-
cuit
Resistance/potentiometer in 3-wire cir-
cuit
Resistance/potentiometer in 4-wire cir-
cuit