Description; Brief Description; Block Diagram - JUMO mTRON T Operating Manual

Measuring, control, and automation system analog input module 4-channel

Hide thumbs Also See for mTRON T:

Table of Contents

2.1

The analog input module 4-channel is equipped with four universal analog inputs that are elec-

trically isolated from each other for thermocouples, RTD temperature probes, resistance trans-

mitters, resistance/potentiometers, or standard signals (current or voltage) as well as one

digital input (DC 0/24 V). The digitized input values/states are available in the system for further

processing.

LEDs are used to indicate applied voltage supply, the module operating status, as well as the

logical status of the digital input.

A setup program or the multifunction panel 840 can be used to comfortably configure the ana-

log input module.

For service work, the module insert can be easily pulled out of the case at the front. The case

including the bus PCB remains mounted on the DIN rail.

2.2

4 universal analog inputs

electrically isolated

1 digital input

(DC 0/24 V)

Voltage supply

2 Description

System bus

Table of Contents