Nv Connecting List - JUMO mTRON T Operating Manual

Measuring, control, and automation system analog input module 4-channel

Hide thumbs Also See for mTRON T:

Table of Contents

6.4

NV connecting list

The NV connecting list is used to link external inputs (NV_...) of the analog input module 4-

channel to signals from other modules via the system bus.

A comprehensive list with the module signals is included in the following chapter.

 Chapter 6.4.1 "Digital signals (overview)", page 49

Further information about the signals can be found in the operating manual for the relevant

module.

Replacement values are available in the event that these signals are not available (connection

to base unit interrupted in "Stop" state).

 Chapter 6.4.2 "Replacement values (overview)", page 55

NOTE!

There is no NV connecting list in the input/output module configuration menu on the multi-

function panel. Instead, a central NV connecting list is available in the configuration menu of

the base unit (CPU).

Setup dialog

Parameter

Digital signal /

Value

Selection/settings

Select input to be connected.

6 Configuration

Description

List of external inputs of the module

If a connection has already been config-

ured, the module and its signal are dis-

played in the "Value" column.

Table of Contents