JUMO mTRON T Operating Manual page 48

6 Configuration
Parameter
...\NV_SR01
(Example)
Replacement
value
?
Replacement value
The replacement value is used if the relevant signal is not available (connection to base unit
interrupted or system in "Stop" state).
Status after change of configuration
The connections are available immediately.
Behavior after power on
The connections are available immediately after system initialization.
48
Selection/settings
This is the previously selected external input.
Select the module and – in the selector
next to it on the right – the signal to con-
nect to the external input.
Replacement value for the relevant signal (The selection On/Off is active if a signal
is assigned to the external input.)
Off
On
Description
List of modules in the system and the
relevant signals
Low level (0)
High level (1)