Table of Contents
Advertisement
WIFI232-B2 User Manual
4.9
Parameter Setting
4.9.1 Web Management Page
When fist user WIFI232 module, user may need some configuration. User can
connect the AP interface of WIFI232 module to PC, then configure it on Web
Management Page.
By default, the SSID of AP interface of WIFI232 module is WIFI232. And the IP
address, user name and password are as below:
SSID
IP Address
Subnet Mask
User Name
Password
4.9.2 Open Web Management Page
➢ Connect laptop to WIFI232 which SSID is "WIFI232" via wireless LAN card.
➢ After wireless connection is OK. Open browser and access http://10.10.100.254;
➢ Then input user name and password in the page as following and click "OK"
button.
Figure 28 Open Web Management Page
Parameters
Table 10 WIFI232 Web Management Default Setting
41 / 102
Default Setting
WIFI232
10.10.100.254
255.255.255.0
admin
admin
Advertisement
Table of Contents
