Waveshare WIFI232-B2 User Manual page 78

WIFI232-B2 User Manual
Set Operation:
AT+HTTPCN=<connection><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

connection
5.2.1.48 AT+HTTPUA
Function: Set/Query User-Agent of HTTP protocol header
Format:
Query Operation:
AT+HTTPUA<CR>
+ok=<User-Agent><CR>< LF ><CR>< LF >
Set Operation:
AT+HTTPUA=<User-Agent><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

User-Agent: User-Agent of HTTP protocol header
5.2.1.49 AT+HTPSV
Function: Set/Query IP and Port number of HTTP Server (New)
Format:
Query Operation:
AT+HTPSV<CR>
+ok=<ip>,<port><CR>< LF ><CR>< LF >
Set Operation:
AT+HTPSV=<ip>,<port><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

ip

port
Note: This setting only valid at HTTPD Client mode, and it is effective after restart
module. Can be set at other modes.
78 / 102