Waveshare WIFI232-B2 User Manual page 83

WIFI232-B2 User Manual
 WEP-A: valid when auth=OPEN/SHARED (WEP, ASCII)
 TKIP: valid when auth=WPAPSK
 AES: valid when auth=WPAPSK

key: password
 if encry=WEP-H: 10bits or 26bbits (HEX)
 if encry=WEP-A: 5bits or 13 bits (ASCII)
 >8 bits and <64 bits
Note: The setting is valid at STA mode, it is effective after restart module. Can be set at
AP mode as well.
5.2.1.58 AT+WSKEYC
Function: Set/Query the third AP's password of three STA parameters settings
Format:
Query Operation:
AT+WSKEYC<CR>
+ok=<auth, encry, key><CR><LF><CR><LF>
Set Operation:
AT+WSKEYC=<auth, encry, key><CR>
+ok<CR><LF><CR><LF>
Parameters:

auth: Authentication mode
 OPEN
 SHARED
 WPAPSK

encry: Encryption algorithm
 NONE: valid when auth=OPEN
 WEP-H: valid when auth=OPEN/SHARED (WEP, HEX)
 WEP-A: valid when auth=OPEN/SHARED (WEP, ASCII)
 TKIP: valid when auth=WPAPSK
 AES: valid when auth=WPAPSK
83 / 102