Waveshare WIFI232-B2 User Manual page 73

WIFI232-B2 User Manual
AT+IDFIR=<on/off><CR>
+ok<CR><LF><CR><LF>
Parameters:

on/off: It is off by default
5.2.1.33 AT+IDEVE
Function: Enable/Disable "Send and ID every time to send data" function
Format:
AT+IDEVE=<on/off><CR>
+ok<CR><LF><CR><LF>
Parameters:
Enable or disable function that add ID every time send data. It is default disable
Note: The ID function should be handled on server. When the module connects to
server, it will plus two-bytes ID (0~65535, high byte first and low byte follow) and two-
bytes radix-minus-one complement of ID. For example, if the ID of module is 1111, the
first four-bytes sent to server is that "0x04 0x57 0xFB 0xA8"
5.2.1.34 AT+AABR
Function: Enable/Disable auto-baud function
Format:
AT+AABR=<on/off><CR>
+ok<CR><LF><CR><LF>
Parameters:
It is enable by default
5.2.1.35 AT+DHCPDEN
Function: Enable/Disable DHCP Server function of LAN port
Format:
AT+DHCPDEN=<on/off><CR>
+ok<CR><LF><CR><LF>
Parameters:
73 / 102