Waveshare WIFI232-B2 User Manual page 96

WIFI232-B2 User Manual
Q3: How to configure transparent serial port application (UDP protocol)
with two WIFI modules?
A3
: Network structure as below figure:
➢
Module 1# Setting:
 Works as AP mode;
 LAN IP address: 10.10.100.254;
 Network Protocol: UDP, Port ID: 8899; Application IP address:10.10.100.100;
➢
Module 2# Setting:
 Works as STA mode;
 WAN connection type: Static IP (10.10.100.100)
 Network Protocol: UDP, Port ID: 8899; Application IP address: Module 1#‟s
LAN IP address (10.10.100.254);
 LAN IP address: 10.10.99.254 (Different net segment with WAN port)
96 / 102