Module Debug And Use Cases; Mode Debug; Software Debug Tools; Network Connection - Waveshare WIFI232-B2 User Manual

WIFI232-B2 User Manual
 on: enable (module will reboot if timeout)
 off: disable
Note: This setting is effective after restart module
5.2.1.68 AT+TIMEOUTT
Function: Set/Query timeout
Format:
Query Operation:
AT+TIMEOUTT<CR>
+ok=<time><CR><LF><CR><LF>
Set Operation:
AT+TIMEOUT=<time><CR>
+ok<CR><LF><CR><LF>
Parameters:

time: 60~65535s. It is 3600s by default.

6 Module Debug and Use Cases

6.1

Mode Debug

6.1.1 Software Debug Tools

In order to facilitate the use, please use TCP232-Test which is the serial and
network debugging two-in-one function.

6.1.2 Network Connection

In order to test the serial port to the WIFI network address conversion, we will
module serial connected with the computer, network and computer links to WIFI.
Due to the need to have both a WIFI and serial special requirement, you can use
the desktop with a USB card, or the laptop. To test, we connect the module to the
mother board, and connect the USB interface of mother board to PC. Connect the WIFI
of module to PC as well.
88 / 102