Waveshare WIFI232-B2 User Manual page 66

WIFI232-B2 User Manual
 5/13 bits (ASCII): when encry=WEP-A
Note: key must be larger than 8 bits and less than 64 bits, and it is available only in AP
mode. It is effective after restart the module, can be set in STA mode.
5.2.1.16 AT+MSLP
Function: Set/Query Module sleep mode. (WIFI stop working whether it is at AP or STA
mode)
Format:
Query Operation:
AT+MSLP<CR>
+ok<sta><CR><LF><CR><LF>
Set Operation:
AT+MSLP=<on/off><CR>
+ok<CR><LF><CR><LF>
Parameters:

sta
 on
 off
Notes: Set "off" make the module enter sleep mode. Set "on" to exit from sleep mode.
If the module is at sleep mode, use can input AT+MSLP=on to exit and back to
configuration mode.
5.2.1.17 AT+WSCAN
Function: Search AP at STA mode
Format:
AT+WSCAN<CR>
+ok=<ap_site><CR><LF><CR><LF>
Parameter:

ap_site: The first line of the response is "RSSI, SSID, BSSID, Channel, Encryption,
Authentication". They are signal strength, network name, MAC address,
channel, mode of authentication and encryption algorithm separately.
5.2.1.18 AT+TCPLK
66 / 102