Mode Selection Page; Ap Interface Setting Page - Waveshare WIFI232-B2 User Manual

WIFI232-B2 User Manual
 Network Setting: Setting the network parameters, only TCPA related
parameters.
 Device Management: After complete the configuration above, click reset
module

4.9.4 Mode Selection Page

This page is used to setting the wireless networking mode (AP and STA mode).
"Data transmission mode" is used to select the working mode of module to
"Transparent Mode", "Serial Command Mode", "HTTPD Client Mode" or "GPIO Mode".
"TCP Connection Password Authentication" can select whether open TCP password
authentication.
Note: This authentication only works when the module is set as TCP server. After
opening this function, the fist data sent to module is password plus newline when TCP
client connect to TCP server of module. The password is default "admin" which is used
to login web. For example, the first data is "0x61 0x64 0x6D 0x69 0x6E 0x0D 0x0A" (HEX)

4.9.5 AP Interface Setting Page

WIFI232 module supports AP interface, with this interface, users can manage
module easily as well as realize network. This page is used to setting the parameters
when WIFI232 module work as AP.
Figure 30 Mode Selection Page
43 / 102