Table of Contents
Advertisement
WIFI232-B2 User Manual
Figure 47 "COMM Tools" Serial Debug Tools
Open test software TCP232-Test.exe, selection of hardware attached to the
computer's serial number, this is COM10. Choose 57600 baud rate, such as the WIFI
module serial default baud rate, open the serial port.
Network settings in TCP client mode, the server IP address input 10.10.100.254, this
is WIFI module default IP address, server port number 8899, this module default
monitor TCP port number, click the link to establish TCP connection. Then click the
create connection.
90 / 102
Advertisement
Table of Contents
