Module Working Mode - Waveshare WIFI232-B2 User Manual

WIFI232-B2 User Manual
Notes:
Restart Module Button: When use setting the parameters of different web pages,
could click "Apply" button to confirm the setting, but the setting take effect only after
user click the "Restart" Button here, the module will re-boot up and refresh the
memory information with new changes.

4.9.13 Module Working Mode

WIFI232 has various working mode. By default (Starting), the module will enter
transparent transmission mode. Use can use serial port command to switch to
configuration mode. WIFI232 UART default parameters setting as below:
Figure 39 WIFI232 Default UART Port Parameters
In configuration mode, user can set the module through AT+ Instruction set, which
covers all of web page setting function.
Figure 38 Device Management Page
50 / 102