Table of Contents
Advertisement
WIFI232-B2 User Manual
The WIFI232 web management page supports English and Chinese language. User
can select language environment at the top right corner and click "Apply" button
The main menu includes ten pages: "Quick configure", "Mode Selection", "AP
Interface Setting", "STA Interface Setting", "Application Setting", "Ethernet Setting",
"HTTPD Client Mode", "WEB IO", "Advanced" and "Device Management".
4.9.3 Quick Configure
The Quick Configure provides users with a method of rapid configuration module.
User follows the steps to configure the parameters and restart, could make the module
work normally. With this way, user can reduce the configuration steps and time. Of
cause the option on this page is less, if you need more detailed configuration, you can
go to corresponding configuration page.
This page has four configuration options and a restart.
WI-FI Setting: Configure the working mode of WIFI, it can be configured as AP
or STA.
Ethernet Ports Setting: Enable/Disable the Ethernet port, and set up the
corresponding work mode.
UART Setting: Configure the serial port parameters, including baud rate, parity
bit, 485 functions and so on.
Figure 29 Quick Configure Page
42 / 102
Advertisement
Table of Contents
