Waveshare WIFI232-B2 User Manual page 81

WIFI232-B2 User Manual
Parameters:

ap's ssid: SSID of AP
Note: This setting is only valid at STA mode, and it is effective after restart module
5.2.1.55 AT+WSSSIDC
Function: Set/Query the third AP's SSID of three STA parameters settings
Format:
Query Operation:
AT+WSSSIDC<CR>
+ok=<ap's ssid><CR><LF><CCR><LF>
Set Operation:
AT+WSSSID=<ap's ssid><CR>
+ok<CR><LF><CCR><LF>
Parameters:

ap's ssid: SSID of AP
Note: This setting is only valid at STA mode, and it is effective after restart module
5.2.1.56 AT+WSKEYA
Function: Set/Query the first AP's password of three STA parameters settings
Format:
Query Operation:
AT+WSKEYA<CR>
+ok=<auth, encry, key><CR><LF><CR><LF>
Set Operation:
AT+WSKEYA=<auth, encry, key><CR>
+ok<CR><LF><CR><LF>
Parameters:

auth: Authentication mode
 OPEN
 SHARED
 WPAPSK
81 / 102