Wireless Data Acquisition Card Application; Appendix A: Questions And Answers - Waveshare WIFI232-B2 User Manual

WIFI232-B2 User Manual
Notes: IP address of LAN port and WAN port should in different segment, as picture
shown, we change to 10.10.99.254 (the address get from left module WAN port DHCP
is 10.10.100.xxx)

6.3.4 Wireless Data Acquisition Card Application

For this wireless data acquisition card application, one PC works as data server and
every data acquisition card connects with a WIFI232 module to support wireless
connection function.
Figure 53 Wireless Data Acquisition Card Application
As above figure, one WIFI232 configured as AP mode and all others configured as
STA mode. All WIFI232 which configured as STA and data server PC wireless connected
to WIFI232 which configured as AP to make up a wires network
Data server PC open TCP/Server protocol and all WIFI232 modules open TCP/Client
protocol All data acquisition cards' data and sampling information can be transmitted
to data server PC for operation.

7 Appendix A: Questions and Answers

94 / 102