Table of Contents
Advertisement
WIFI232-B2 User Manual
Format:
Query Operation:
AT+HTPHEAD<CR>
+ok=<head><CR>< LF ><CR>< LF >
Set Operation:
AT+HTPHEAD=<head><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
head: content of HTTP header. Please use "<<CRLF>>" as ENTER for newline.
Its maximum length is 200 bytes
5.2.1.53 AT+WSSSIDA
Function: Set/Query the first AP's SSID of three STA parameters settings
Format:
Query Operation:
AT+WSSSIDA<CR>
+ok=<ap's ssid><CR><LF><CR><LF>
Set Operation:
AT+WSSSIDA=<ap's ssid><CR>
+ok<CR><LF><CR><LF>
Parameters:
ap's ssid: SSID of AP
Note: This setting is only valid at STA mode, and it is effective after restart module
5.2.1.54 AT+WSSSIDB
Function: Set/Query the second AP's SSID of three STA parameters settings
Format:
Query Operation:
AT+WSSSIDB<CR>
+ok=<ap's ssid><CR><LF><CR><LF>
Set Operation:
AT+WSSSODN=<ap's ssid><CR>
+ok<CR><LF><CR><LF>
80 / 102
Advertisement
Table of Contents
