Waveshare WIFI232-B2 User Manual page 85

WIFI232-B2 User Manual

off: The sockets distribute function is disable
Note: The setting is effective after restart module
5.2.1.61 AT+HEARTEN
Function: Enable/Disable heartbeat packet function
Format:
Query Operation:
AT+HEARTEN<CR>
+ok=<sta.><CR><LF><CR><LF>
Set Operation:
AT+HEARTEN=<sta.><CR>
+ok<CR><LF><CR><LF>
Parameters:

sta.
 on: the heartbeat packet function is enable
 off: the heartbeat packet function is disable
Note: The setting is effective after restart module.
5.2.1.62 AT+HEARTTP
Function: Set/Query heartbeat packet transmit position
Format:
Query Operation:
AT+HEARTTP<CR>
+ok=<sta.><CR><LF><CR><LF>
Set Operation:
AT+HEARTTP=<sta.><CR>
+ok<CR><LF><CR><LF>
Parameters:

sta.:
 NET: heartbeat packet is transmitted to Ethernet
 COM: heartbeat packet is transmitted to serial port
85 / 102