Waveshare WIFI232-B2 User Manual page 76

WIFI232-B2 User Manual
Function: Set/Query IP and port of HTTP server
Format:
Query Operation:
AT+HTTPURL<CR>
+ok=<ip>,<port><CR><LF><CR><LF>
Set Operation:
AT+HTTPURL=<ip>,<port><CR>
+ok<CR> <LF><CR><LF>
Parameters:

ip: ip of HTTP server

port: port of HTTP
5.2.1.44 AT+HTPMODE
Function: Switch setting type of HTTP socket header (HTTPD Client)
Format:
Query Operation:
AT+HTPMODE<CR>
+ok=<type><CR>< LF ><CR>< LF >
Set Operation:
AT+HTPMODE=<type><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

type
 new: setting type of new version
 old: setting type of old version
Note: The setting only valid at HTTPD Client mode. It is effective after restart module.
Can be set at other mode as well.
5.2.1.45 AT+HTTPTP
Function: Set/Query request type of HTTP
Format:
76 / 102