Waveshare WIFI232-B2 User Manual page 79

WIFI232-B2 User Manual
5.2.1.50 AT+HTPTP
Function: Set/Query request type of HTTP (New)
Format:
Query Operation:
AT+HTPTP<CR>
+ok=<type><CR>< LF ><CR>< LF >
Set Operation:
AT+HTPTP=<type><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

type:
 GET
 PUT
 POST
Note: This setting only valid at HTTPD Client mode, and it is effective after restart
module. Can be set at other modes.
5.2.1.51 AT+HTPURL
Function: Set/Query path of HTTP protocol header (New)
Format:
Query Operation:
AT+HTPURL<CR>
+ok=<path><CR>< LF ><CR>< LF >
Set Operation:
AT+HTPURL=<path><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:

path: path of HTTP protocol header
5.2.1.52 AT+HTPHEAD
Function: Set/Query header of HTTP (New)
79 / 102