Waveshare WIFI232-B2 User Manual page 98

WIFI232-B2 User Manual
➢
Protocol: UDP
 No Server/Client selection required;
 Application IP address required: it's target device's IP address;
 Port ID required: 8899 (Default)
Q5: How to configure transparent serial port application: Two WIFI modules
all configured as STA and connection through AP?
A5:
Network structure as below figure:
➢
Module 1# Setting: (We use WIFI232 as AP for this example)
 Works as AP mode and all default setting;
➢
Module 2# Setting:
 Works as STA mode;
 WAN connection type: Static IP: 10.10.100.100;
 Network Protocol: TCP/Server, Port ID: 8899;
 LAN IP address: 10.10.99.254 (Different net segment with WAN port);
➢
Module 3# Setting:
 WAN connection type: Static IP: 10.10.100.101;
 Network Protocol: TCP/Client, Port ID: 8899; Application IP address: Module
2#‟s WAN IP address (10.10.100.100);
 LAN IP address: 10.10.98.254 (Different net segment with WAN port);
Works as STA mode;
98 / 102