Waveshare WIFI232-B2 User Manual page 65

WIFI232-B2 User Manual

ssid: SSID when module works as AP

channel:
 AUTO
 CH1~CH11
Note: This instruction only available for WIFI232 works as AP. It is effective after restart
the module. Can be set at STA mode.
5.2.1.15 AT+WAKEY
Function: Set/Query WIFI encryption parameters at AP mode
Format:
Query Operation:
AT+WAKEY<CR>
+ok=<auth, encry_key><CR><LF><CR><LF>
Set Operation:
AT+WAKEY=<auth, encry_key><CR>
+ok<CR><LF><CR><LF>
Parameters:

auth
 OPEN
 SHARED
 WPAPSK

encry
 NONE: available only auth=OPEN
 WEP-H: available only auth=OPEN or SHARED (WEP, HEX)
 WEP-A: available only auth=OPEN or SHARED (WEP, ASCII)
 TKIP: available only auth=WPAPSK
 AES: available only auth=WPAPSK
 TKIPAES: available only auth=WAPAPSK

key:

16/26 bits (HEX): when encry=WEP-H
65 / 102