Waveshare WIFI232-B2 User Manual page 95

WIFI232-B2 User Manual
Q1: How to configure transparent serial port application (TCP protocol) with
two WIFI modules?
A1:
Network structure as below figure:
➢
Module 1# Setting:
 Works as AP model
 LAN IP address: 10.10.100.254
 Network Protocol: TCP/Server, Port ID: 8899; (Module default setting)
➢
Module 2# Setting:
 Works as STA mode;
 WAN connection type: DHCP or Static IP (For example 10.10.100.100)
 Network Protocol: TCP/Client, Port ID: 8899; Application IP address: Module
1#'s LAN IP address (10.10.100.254)
 Note: When module 2# works s STA mode, module's WIFI interface works as
WAN port. Module's WAN IP address and LCAN IP address shall be setting
different segment. SO, module 2#'s LAN IP address must change to other
segment; (For this sample, we change to 10.10.99.254);
Q2: Where to Set WIFI Module LAN IP and WAN IP through WEB page?
A2:
WIFI232 Wireless LAN IP address setting see "AP Interface Setting Page" as below
Figure.
Figure 54 Q1
95 / 102