Register The Registration Key; Making Network Settings - Panasonic KX-VC300 User Manual

Register the Registration
Key
In this procedure, you will register the Registration Key
you obtained to the unit. To perform registration,
network settings must be configured first.

Making Network Settings

If this is the first time you are using
the unit
After turning the unit on, you need to set the connection
mode, device name, date and time, and network
settings. These settings can be changed later.
1.
Press the Power button to turn on the unit.
•
The connection mode setting screen is
displayed.
2.
Press [Enter] and use [
Traversal Mode".
Note
•
Communication cannot be established with
a party whose connection mode setting
differs from yours.
3.
Press [G].
•
A dialog box to confirm the saving of settings is
displayed.
4.
Select "Yes" using [
•
The device name setting screen is displayed.
Document Version 2012-03
][ ] to select "NAT
][ ], then press [Enter].
Setting up KX-VC Series NAT Traversal Service
5.
Enter a name for the device (up to 24 characters).
6.
Press [G].
•
A dialog box to confirm the saving of settings is
displayed.
7.
Select "Yes" using [
•
The date and time setting screen is displayed.
8.
Select the item using [
information.
•
Enter the year (4 digits), month (1–2 digits), day
(1–2 digits), time (24 hour display), and select
the date format (Month/Day/Year, Day/Month/
Year, Year/Month/Day) and the hour display
format (12h/24h).
9.
Press [G].
•
A dialog box to confirm the saving of settings is
displayed.
10.
Select "Yes" using [
•
The network settings screen is displayed.
NAT Traversal Service User's Guide
][ ], then press [Enter].
][ ], then input
][ ], then press [Enter].
11