"RTP and RTCP for Audio": Enter the initial port
number (5100–5164) for RTP and RTCP for Audio
(default: 5100).
"RTP and RTCP for Video": Enter the initial port
number (5200–5264) for RTP and RTCP for Video
(default: 5200).
"Camera Control": Enter the initial port number
(5300–5364) for controlling a video camera (default:
5300).
"RTP and RTCP for Video (Sub)": Input the sub
image RTP/RTCP port number (5400–5464).
(default: 5400)
"BFCP": Input the BFCP initial port number (5800–
5890). (default: 5800)
"SIP": Enter the port number for 2-party video
conference calls (5000–5099) for communication
using a SIP server (default: 5060).
Note
•
The changed port number will be displayed
on the unit information screen (Page 90).
"H.245": Enter the initial port number for H.245
(5500–5580) (default: 5500).
Note
•
For the following items, a number will be
automatically added to the initial port
number that you enter. The total number
indicates the range and values of available
port numbers for the items.
–
"RTP and RTCP for Audio"
–
"RTP and RTCP for Video"
–
"Camera Control"
–
"RTP and RTCP for Video (Sub)"
–
"BFCP"
–
"H.245"
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [
][
] to select "Yes" and press [ENTER].
•
The administrator menu screen is displayed.
Making Call Type Settings
1.
Select "Call Type Settings" and press [ENTER].
•
The call type settings screen is displayed.
2.
Use [
][
] to select the following items for input:
"SIP": Use [
][
"OFF".
Document Version 2015-08
] to select "ON" (default) or
Note
•
When "OFF" is selected, you cannot use a
SIP server even if "ON" is set to "SIP
Server" (Page 124).
•
If the other party is using the KX-VC300/
KX-VC600 with a software version older
than 3.00 (not including 3.00), you cannot
make a video conference call using H.323.
You must select "ON".
"H.323": Use [
][
"OFF".
Note
•
When "OFF" is selected, you cannot use a
gatekeeper and H.460 even if "ON" is
selected for "Gatekeeper" and "H.
460" (Page 125).
"Priority for connection mode": Press [ENTER]
and use [
][
] to select "IP Mode
(SIP)" (default), "IP Mode (H.323)", or "NAT
Traversal Mode".
Note
•
The communication type selected here will
be reflected onto the device's settings such
as its displayed contents and default
connection mode values for making calls.
3.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
4.
Use [
][
] to select "Yes" and press [ENTER].
•
The administrator menu screen is displayed.
Making SIP Settings
When using a SIP server over an intranet, video
conference calls can be made using SIP URIs (SIP user
name@SIP domain name).
Note
•
These settings can only be made when "SIP"
is set to "ON" on the call type settings screen.
•
Video conference calls to an MCU or a
non-Panasonic video conference system
through a SIP server using a SIP URI are not
guaranteed.
•
When connecting to an MCU by entering the
MCU's conference room number@IP address,
"SIP Server" and "Gatekeeper" (Page 125)
must be set to "OFF".
Contacts and Settings
] to select "ON" (default) or
User Manual
123