Installation according to EMC (installation of a CE-typical drive system)
6.2.6
Wiring outside of the control cabinet
Notes for cable routing outside the control cabinet:
The longer the cables the greater the space between the cables must be.
ƒ
If cables for different signal types are routed in parallel, the interferences can be
ƒ
minimized by means of a metal barrier or separated cable ducts.
Cover
Signal cables
Fig. 6-6
Cover
Cable duct
Fig. 6-7
EDS84ASC552 EN 10.0
Barrier without
opening
Power cables
Cable routing in the cable duct with barrier
Communication cables
Measuring cables
Analog cables
Control cables
Power cables
Cable routing in separated cable ducts
Electrical installation
Wiring outside of the control cabinet
6
EMVallg001
EMVallg002
175