Certification - Lenze 8400 Hardware Manual

10.9

Certification

The certification of drive-based safety in the controllers of the 8400 series is based on the
following test fundamentals:
EN ISO 13849-1
ƒ
Safety of machinery - Safety-related parts of control systems - Part 1: General
principles for design
EN ISO 13849-2
ƒ
Safety of machinery - Safety-related parts of control systems - Part 2: Validation
EN 60204-1
ƒ
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
IEC 61508, Part 1-7
ƒ
Functional safety of electrical/electronic/programmable electronic safety-related
systems
EN 61800-3
ƒ
Adjustable speed electrical power drive systems - Part 3: EMC requirements and
specific test methods
EN 61800-5-1
ƒ
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements -
Electrical, thermal and energy
EN 61800-5-2
ƒ
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements -
Functional
EN 62061
ƒ
Safety of machinery - Functional safety of safety-related electrical, electronic and
programmable electronic control systems

Declarations of conformity and certificates can be found on the internet
at:http://www.Lenze.com and on the product CD.
EDS84ASC552 EN 10.0
Safety engineering

10
Certification
287