Technical Data - Lenze 8400 Hardware Manual

10.7

Technical data

Supply
The inputs and outputs are isolated and designed for a low-voltage supply through a safely
separated power supply unit (SELV/PELV) of 24 V DC. P/N switching input signals and test
pulses  1 ms are permissible.
Active sensors are directly wired to the X80 terminal strip.
Passive sensors are wired to the X80 terminal strip via a switching device. The switching
device must comply with the required control category of the application.
There is no monitoring for short circuits.
EDS84ASC552 EN 10.0
Safety engineering

Technical data
10
281