5.3.6
Wiring outside of the control cabinet
EDSVF9383V EN 7.1−04/2012
Wiring outside of the control cabinet
Notes for cable routing outside the control cabinet:
ƒ The longer the cables the greater the space between the cables must
be.
ƒ If cables for different signal types are routed in parallel, the
interferences can be minimized by means of a metal barrier or
separated cable ducts.
Cover
Signal cables
Power cables
Fig. 5.3−2
Cable routing in the cable duct with barrier
Cover
Communication cables
Cable duct
Measuring cables
Analog cables
Control cables
Power cables
Fig. 5.3−3
Cable routing in separated cable ducts
l
Basics for wiring according to EMC
Barrier without
opening
5.3
5.3.6
EMVallg001
EMVallg002
5.3−5