Diagnostics; Display Of Operating Data, Diagnostics; Status Display Via Controller Leds - Lenze 8400 Hardware Manual

9

Diagnostics

9.1

Display of operating data, diagnostics

9.1.1

Status display via controller LEDs

StateLine, HighLine
During operation, the operating status of the controller is indicated by four light-emitting
diodes.These are located at the front of the device. The upper two LEDs indicate the current
status of the CAN bus connection and the lower two LEDs indicate the status of the
controller.
LED
CAN-RUN
CAN-ERR
DRV-RDY
DRV-ERR
TopLine
During operation, the operating status of the controller is indicated by eight light-emitting
diodes. These are located at the front of the device. Two LEDs indicate the current status
of the CAN bus connection and another two indicate the controller status. One LED
indicates the axis bus status. Another three LEDs can be parameterised for display
purposes of the application.
LED
EDS84ASC552 EN 10.0
Display of operating data, diagnostics
Labelling Colour
CAN-RUN green
CAN-ERR red
DRV RDY green
DRV ERR red
8400SLC026
Labelling Colour
CAN-RUN green
CAN-ERR red
DRV RDY green
DRV ERR red
Axis bus green
User1 green/red -
User2 red
User3 green
8400TLC033

Diagnostics
Status display via controller LEDs
Description
CAN-BUS o.k.
CAN-BUS error
Controller is ready for operation
Error in the controller or through the application
Description
CAN-BUS o.k.
CAN-BUS error
Controller is ready for operation
Error in the controller or through the application
-
-
-
9
267