Viewing Source Drives Over The Network Using Iscsi; Configuring The Iscsi Initiator - Logicube Falcon-NEO User Manual

6.

10.2 Viewing Source Drives Over the Network Using iSCSI

An iSCSI initiator must be configured to view the contents of Source drives over a network. Although
there are many iSCSI initiators available, these next sections will discuss configuring Microsoft's iSCSI
initiator in Windows.
Using an iSCSI initiator may
require additional assistance
from your IT administrator.

10.2.1 Configuring the iSCSI Initiator

1.
®
-Neo User's Manual
Logicube Falcon
The contents of the drive will be shown.
Open the iSCSI initiator. In the Target tab, enter the Falcon-NEO's host name or
IP address in the Target field. Click the Quick Connect button to continue.
VIEWING DRIVES
126