Dh-Xvr7816S-4Kl-X/Dh-Xvr5832S-X; Installing Device Into Rack - Dahua DH-XVR4104C-X User Manual

4. Connect the other end of
HDD cable to the
mainboard.

2.2.6 DH-XVR7816S-4KL-X/DH-XVR5832S-X

1. Loose the screws on the
panel and remove the
cover.
4. Connect the other end of
HDD cable to the
mainboard
2.3

Installing Device into Rack

Not all models support this function.
To install the DVR into Rack, do the following:
Step 1 Check if the in-house temperature is lower than 35℃(95℉) and make sure the 15cm
(6in.) spacing around the Device for ventilation.
Step 2 Use six screws to fix the DVR on each side.
Step 3 Install from the bottom up.
5. Use the power cable to
connect HDD and
mainboard.
2. Fix the HDD(s) onto the
bracket. Remove the top
bracket if you want to install
HDD to the bottom bracket.
5. Use the power cable to
connect HDD and
mainboard.
6. Put back the cover and fix
the screws.
3. Connect one end of HDD
cable to the HDD.
6. Put back the cover and fix
the screws.
Getting Started 8