Deleting Plc Programs (F8); Visualize (F3 - Main Menu); Results Database (F5 - Main Menu) - Sartorius Sartocheck 4 plus Operating Instructions Manual

7.15.5 Deleting PLC Programs (F8)

Fig. 7-45 | PLC program deletion
7.16 Visualize (F3 – Main Menu)
Fig. 7-46 | Visualize
7.17 Results Database
(F5 – Main Menu)
Fig. 7-47 | Results database
This function will delete programs in memory locations PLC 1 and PLC 2 from
the selected test unit.
This function will display the test status of any currently active test unit.
Only active test units will be selectable. Direct access to this screen is also possible
by using the status buttons at the bottom of all screens.
The results database is structured analogously to the program database.
This is where all test results are saved. The functions of the results database
are similar to those of the program database.
F1: Test results from internal memory
This will display all test results inside the Sartocheck
F2: Write test results from SD Card to memory
This enables the results to be uploaded to the internal memory of the
®
Sartocheck 4 plus Bag tester
F3: Upload test results from network
Displays all results on the network in the corresponding directory
F4: Save all test results to SD card
Saves all test results in the Sartocheck
F5: Save all test results to network
Saves all test results on the network in the corresponding FTP directory
F6: Manage audit trail
Manages the audit trail and defines which events are traced
®
4 plus Bag tester
®
4 plus Bag tester on an SD card
Operation 47