Sartorius Sartocheck 4 plus Operating Instructions Manual page 55

Fig. 7-65 | Network connection
Fig. 7-66 | FTP Server
Selecting F1 from the Network settings menu brings up the Network connection
menu. Within this menu is where the IP address of the Sartocheck
is identified as well as the addresses of the server and gateway. Explanations of the
parameters follow:
F1: Address allocation
There are two (2) choices for this item
Automatic: This is chosen if a dynamic address assignment via DHCP is made.
If this option is chosen, all subsequent fields will be grayed out, as the DHCP
server will automatically provide the parameters.
Manual: If a static address assignment is being made, then this option should
be chosen. At in minimum the SC4 plus IP address and the subnet mask must
be entered.
F2: SC4 plus IP address
If a static address assignment is selected (manual), the IP address of the
®
Sartocheck 4 plus Bag tester is entered here
F3: Subnet mask
Use the information from the subnetwork screen to define the network type
F4: DNS server address
If a static address assignment is selected (manual), enter the IP address of
the DNS server potentially existing on the network.
This is required for the resolution of addresses such as ftp.company.com
F5: Gateway
A gateway address is needed if the FTP server is located in a network other
®
than the Sartocheck 4 plus Bag tester.
Selecting F2 from the Network settings menu brings up the FTP server menu.
Within this menu is where the IP address and port of the FTP server are set, as well as
the user name and password that the Sartocheck
accessing the FTP server. Explanations of the parameters follow:
F1: Server address
Enter the FTP server address as the numerical IP address (xxx.xxx.xxx.xxx) or,
if a DNS server is available, as a name such as ftp.customernet.com
F2: Port
Enter the FTP port (typically port 21) to which the request should be made for
the connection setup
F3: User name
Enter the user name of the user setup on the FTP server
F4: Password
Enter the applicable password
F5: Timeout
Enter the time out (or wait time) for responses from the FTP server
®
4 plus Bag tester
®
4 plus Bag tester should use when
Operation 55