Sartorius Sartocheck 4 plus Operating Instructions Manual page 33

Fig. 7-10 | Test program: Record data 1
Fig. 7-11 | Test program: Record data 2
Fig. 7-12 | Test program: Start
Fig. 7-13 | Test unit selection
Enter record data 1 (up to 32 characters per field)
Company: Company name
Building: Building name; house number
Department: Identification of the department
Manufact. site: Production sector
Product: Product name
Product lot: Batch number
Filter: Filter size
Filter lot: Number of the filter batch
Locks
After entering with the Shift + F keys, the programmer can lock the data
to prevent any changes. The dialog boxes are then highlighted in gray.
The user can no longer change the entered data. The relevant record data are
entered in the menu "Test program: Record data 1."
Entry of record data 2
Filter line: Name of filter line
Housing: Type of housing
Wetting medium: Type of wetting medium
Test gas: Type of test gas
Water quality: Data on water quality
Comment: Name of operational process
Comment 2: Enter test-relevant remarks
Comment 3: Enter test-relevant remarks
Start the Test Program
Save:
After confirmation, the data are saved
The menu "Test program: Start" lists the options for that test start.
Once the programming is finished, the test can be started.
Choose the test unit on which to perform the integrity test.
Only test units that are currently available will be selectable.
Operation 33