Teach In - Siemens SINUMERIK 808D User Manual

Note
If the tool change is to be performed without travelling to a fixed point, travel to a safe machine position beforehand and save
this point as work step in the step program.
5.2

Teach In

Functionality
Using this function, an approached axis position can be directly entered into a specific traversing block.
Operating sequences
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
01/2017
6. The active tool is inserted into the step program as machining step.
1. You can reach the teach in function in the machining step program by pressing this softkey.
75