Softkeys
Change the display to the relative position display mode and reset the display in the X axis.
Change the display to the relative position display mode and reset the display in the Z axis.
Toggle the display between the absolute position display mode and the relative position display mode in the X axis.
Toggle the display between the absolute position display mode and the relative position display mode in the Z axis.
Switching between the following operating modes:
● Traversing the axes parallel to the axis
● Taper turning
● Radius turning
The parameters for the machining type are displayed in the main screen of the MM+.
The current actual position of the relevant axis is transferred to the selected input field (-X/-Z/+X/+Z).
Programming and Operating Manual (Manual Machine Plus (MM+), Turning)
17
01/2017